INTENDED USE: At 65mm deep this wheelset is aimed specifically at triathletes and time triallists - This is the latest addition to our Premium “Ultimate” full carbon range. Fully specced with the latest carbon FILAMENT WOUND (FW) technology to create a fantastic ride performance, with superb braking, cushioning, cross-wind handling and heat dissipation.
This wheelset is ideal for Triathlons, Time Trials and fast leisure riding too. They are "2-Way Fit", Meaning they are designed for both clincher tyres and the new generation of tubeless tyres.
Standard spec weight is 1610 GRAMS grams (see below). When specced with the wonderfully aero and light CXray spokes/Bitex Superlight hubs.... They come in at 1515 Grams a PAIR!! And they are also "tubeless ready"!
Your wheels will be hand built to order here in the UK by Andy Morgan, owner and founder of k1 wheels. (current build times are shown above).
Our premium full-carbon wheelset utilises patented “filament-wound”, robotic-built, ultra-high temperature K1-65FW rims.
Sounds fancy: Filament winding technology is an automated method which has revolutionised rim consistency in the manufacture of full carbon wheels. Made from single carbon filaments - the manufacturing process enables precise control of every step - resulting in the roundest, strongest, lightest wheel combinations.
This level of precision and care extends throughout the entire quality control process - with each and every rim X-Rayed for structural uniformity and compliance.
Not only does this make for stronger, longer lasting wheels - but also the nature of the "winding process" facilitates another new technology that massively increases braking capability - especially at high temperatures.
The filament winding process enables the injection of a patented ultra heat resistant resin - directly into the carbon filaments - whilst the rim is built. This means the rim's braking surface is fully impregnated with resin during manufacture - rather than a braking surface being added to the surface of the rim post-production.
This makes for better braking - especially on longer descents. These rims have their braking performance tested up to 250 degrees celcius. This is 20 degrees higher than our previous rims - and as high as any top-end rims on the market.
NOTE: Whilst rim tech has leapt forward in recent years - there are still some major things users of carbon wheels need to know! Please do read our page on safe braking and care for your carbon wheels HERE
Handbuilt in the K1 workshop in Gloucestershire. We combine traditional wheel-building techniques with cutting edge technology. And the world of carbon wheel-tech moves endlessly forward! Exciting times!
YOU CAN RUN THESE WHEELS WITH CLINCHERS OR WITH TUBELESS TYRES:
Ideal for tyres from 25c right up to 30c and beyond. Perfect for running tyres at lower pressure and arguably more aerodynamic and faster rolling than traditional hoops.
The rim width debate will continue to rage and rage. What with rims now available from 19 mm right through to 28mm wide. We've decided to go straight down the middle and our rims are Significantly wider than old-school rims but not crazy wide. We think that's the best place to be!
Offered With Full 2 Year Warranty
Full Carbon Clincher 700 C - Filament wound with patented Ultra-High Temp Resin impregnated braking surface.
65mm U-shaped, 25.5mm wide, Full carbon Clincher rim - TUBELESS COMPATIBLE. UD MATTE CARBON
|FREEHUB FITTING||SHIM/SRAM 7/8/9/10/11 or CAMPAG 9/10/11|
|HUB||Ambrosio Italian sealed hubs as standard or upgrade to Bitex 6-Drive hubs.|
|BEARINGS||Sealed Cartridge throughout – All hub types|
PSR aero or Sapim CXRay - Ultra light-ultra aero
20 and 24 spoke combinations
|NIPPLES||Alpina Blu power Nyloc Self-locking (the best!)|
|Carbon specific brake pads||Included|
|WEIGHT (without QR/tapes)||1610 GRAMS PER PAIR Aerolight Version.
1545 GRAMS PER PAIR DT240 ULTIMATE VERSION
1515 GRAMS PER PAIR SUPERAEROLIGHT VERSIONo
|SUGGESTED MAX RIDER||120kg|
Shipping Weight (Box plus wheels)